In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques which you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other regions of the home, you need to get them dog gas mask some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it’s actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you will have to cut around the edge of the mask so you get something that resembles a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.
Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can ensure that nothing will leak when you place the mask on. Make sure the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you’re done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Be sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged securely onto the surface of your dog. Do not make the folds too large or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain the ears are flat and make sure that it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask because your pet security, you’ll need to do some sanding to make certain it’s safe on your dog. You can accomplish it by sanding off any excess paper that may have been removed from your mask.